본문 바로가기
HW Knowledge

MegaRAID - How monitor rebuild progress

by 스쳐가는인연 2019. 6. 9.

/opt/lsi/MegaCLI # ./MegaCli -PDRbld -ShowProg -PhysDrv [:1] -a0

Rebuild Progress on Device at Enclosure N/A, Slot 1 Completed 7% in 170 Minutes.

Exit Code: 0x00
/opt/lsi/MegaCLI #

 

server:~# megacli -PDRbld -ShowProg -PhysDrv [32:1] -aALL

Rebuild Progress on Device at Enclosure 32, Slot 1 Completed 51% in 10 Minutes.

 

MegaCLI PDRbld -Start|-Stop|-Suspend|-Resume|-ShowProg|-ProgDsply -PhysDrv [E0:S0,E1:S1,...] -aN|-a0,1,2|-aALL

MegaCli –LDInfo –Lx|-L0,1,2|-Lall -aN|-a0,1,2|-aALL

 

cf. StorCLI

storcli /cx[/ex]/sx pause rebuild
storcli /cx[/ex]/sx resume rebuild
storcli /cx[/ex]/sx show rebuild
storcli /cx[/ex]/sx start rebuild
storcli /cx[/ex]/sx stop rebuild

출처:
https://www.broadcom.com/support/knowledgebase/1211161499760/lsi-command-line-interface-cross-reference-megacli-vs-twcli-vs-s
https://hwraid.le-vert.net/wiki/LSIMegaRAIDSAS
https://communities.vmware.com/thread/530391

반응형