http://www.t10.org/lists/asc-num.txt
Here is an example:
-----
SCSI Error (<ioc number>:<target id>:<lun>) SCSI_Status=02h (CHECK_CONDITION)
Key=2h (NOT READY); FRU=02h
ASC/ASCQ=29h/00h "LOGICAL UNIT NOT READY, INITIALIZING CMD. REQUIRED"
CDB[]: 2A 00 00 00 00 41 00 00 02 00 - "WRITE(10)"
-----
The SCSI Error report is displayed only if the error occured on
a SCSI read or write command. Any errors on other commands, Request Sense,
Test Unit Ready, etc., are not displayed.
Here is an example:
-----
SCSI Error (<ioc number>:<target id>:<lun>) SCSI_Status=02h (CHECK_CONDITION)
Key=2h (NOT READY); FRU=02h
ASC/ASCQ=29h/00h "LOGICAL UNIT NOT READY, INITIALIZING CMD. REQUIRED"
CDB[]: 2A 00 00 00 00 41 00 00 02 00 - "WRITE(10)"
-----
The SCSI Error report is displayed only if the error occured on
a SCSI read or write command. Any errors on other commands, Request Sense,
Test Unit Ready, etc., are not displayed.
반응형
